Top Mount Valve Commercial Distributors
Bottom Stack Distributors

Clack bottom stack distributors are designed primarily for use with top mount water softeners or filter valves. The stack distributors are comprised of individual ABS segments which are held together with 18-8 stainless steel screws. The segmented stack has the ability to open up when backwashed, removing any fines that might accumulate on the distributor. The standard slot size is .010-.013. Clack bottom stack distributors are designed for use with 14"-36" diameter fiberglass mineral tanks with a 4"-6" top openings. The bottom stack distributors are designed to accommodate a number of different size riser pipes which can be solvent welded or threaded directly into the stack. There is no stack distributor assembly required. To install, solvent weld or thread the riser pipe directly into the distributor and extend the distributor to the bottom of the mineral tank.

Hub and Lateral Series fir Top Mount Valves

Clack top mount hub and lateral systems are designed primarily for use with top mount water softeners or filter valves. The top mount hub and lateral series is designed to accommodate 14"-36" diameter fiberglass mineral tanks with 4" through 6" top openings. The top mount hub and lateral series consists of an ABS hub and 8-PVC slotted laterals with 3/4" threaded adaptors. The hub is available with a number of openings to accommodate different riser pipe diameters. To install, simply solvent weld or thread the riser pipe into the hub and insert it into the tank through the top opening, Thread the laterals into the hub and extend the hub and laterals to the bottom of the mineral tank.